DRY STORM MEN'S RUNNING JACKET

Lightweight windproof and rainproof hooded jacket. Resistance to water prespiration (water column) - 10000 mmH2O, breathability - respiration 7.500 g / mq / 24h.

Size
€72.36
Quantity

Description

Dry Storm running jacket for men

Lightweight, breathable, windproof and waterproof sports jacket protects against wind and rain. Ergonomic design perfectly matches your body movements while running. Air circulation and ventilation is supported by a ventilation gap on the back. The three-layer material (polyester on the outside + membrane + material protecting the membrane from the inside) is covered with a permanent sublimation print.

The front of the jacket has a long YKK zipper that makes it easy to open, put on and take off, a fitted hood, an elongated back and easily accessible zippered pockets (2 pockets on the sides + 1 Napoleon pocket on the chest). The jacket has traditional seams. Seams are not impregnated, glued. Reflective elements guarantee visibility.

Jacket maintenance

1. Secure all locks and closures.

2. Machine wash at warm temperature (110 ° F / 40 ° C) with a high-performance cleaner such as Nikwax® Tech Wash.

3. If you decide to use conventional liquid laundry detergent, we recommend a second rinse to remove all traces of detergent from the fabric.

4. Tumble-dry using the low temperature setting to rejuvenate the garment's Durable Water Repellent (DWR) finish.

5. Do not use fabric softeners, bleach or stain removers, and never dry-clean the garment.

6. We do not recommend using an iron to rejuvenate the DWR finish, as too hot an iron may irreversibly damage the fabric.

The fabric has a durable water-repellent (DWR) finish. DWR serves as an invisible first line of defense in wet conditions, and when properly operated, it causes moisture to accumulate on the surface of the fabric and quickly drain away. The DWR finish will deteriorate over time and will need to be refreshed. An easy way to check the DWR finish of a garment is to spray lightly with water to see if any water is dripping or absorbing through the fabric. Once the fabric has dried, it's time to bring the DWR finish to life. When it is time to refresh the DWR finish, it is recommended to use a refill product Nikwax® TX.Direct Wash-In or TX.Direct Spray-On.

Details
  • deformation resistant
  • jacket protects against wind and rain
  • ventilation system ensures proper air circulation (ventilation slots on the back)
  • chest pocket with zipper
  • two lower pockets with zippers
  • a stable, fitted hood protects the head against rain and wind
  • sleeves, bottom of the jacket and hood finished with elastic rubber
  • elongated back
  • YKK zippers
  • reflective elements aid visibility
  • composition 80% polyurethane, 20% polyurethane
  • weight 120 g / m2
  • resistance to water prespiration (water column) - 10000 mmH2O, breathability - respiration 7,500 g / mq / 24h
  • clothes are produced in Poland by the ATTIQ company
  • THE MATERIALS AND ALL ITEMS USED FOR THE PRODUCTION OF ATTIQ CLOTHES COME FROM THE EUROPEAN UNION
Sizing chart

Men's Dry Storm running jacket
Size S M L XL XXL XXXL
Your chest dimension 78-84 84-90 90-96 96-104 104-110 110-118
The circumference of the jacket in the chest 104 110 116 122 128 134
The circumference of the jacket at the bottom 94 100 106 112 118 124
The length of the jacket at the back from the hood 69.5 72 74.5 77 79.5 82
Side length from armpit 45.5 47 48.5 50 51.5 53
Sleeve length from armpit 52.5 54 60.5 62 63.5 64.5
Weight of the jacket 240g 254g 268g 282g 296g 310g

The dimensions given in the table may vary by +/- 1 cm.